Saran pencarian
  • ph meter
  • Weigh module
  • conductivity meter
  • moisture analyzer
  • smartcal
Semua Kategori
  • Semua Kategori
  • Produk
  • Dukungan
  • Keahlian
  • Acara & Webinar
  • Lainnya
Filter
Indonesia

DO Sensor InPro6860i/12/220/mA/HD

Anti-Bubble Dissolved Oxygen Sensor.The InPro 6860i/12/220/mA/HD is an optical dissolved oxygen sensor with a mechanically modified hydrophilic surface. Combined with its tilted design, it prevents bubble accumulation, creating a highly stable measurement signal.

Increased Yield and Product Quality

The angled tip and hydrophilic surface prevent bubble formation. This eliminates noise for improved production efficiency and process control.

For Digital & Analog Bioreactors

This anti-bubble DO sensor has digital (MODBUS, RS-485) and analog (mA) output signals for compatibility with benchtop bioreactors and transmitters.

Sterilizable and Autoclavable

The InPro 6860i/12/220/mA/HD provides fast, precise oxygen measurement, even after repeated autoclaving and sterilization cycles up to 140° C.

Material No.: 30449706

DO Sensor InPro6860i/12/220/mA/HD
Hubungi untuk Harga
Spesifikasi - DO Sensor InPro6860i/12/220/mA/HD
Measurement Parameter
 Oxygen
Measurement Technology
 Optical fluorescence quenching
Response Time (Text)
 T98 = < 90 s
Primary Media/Application
 Pharmaceutical/Life Science Production
ISM (Digital) or Analog
 ISM (Digital)
Wetted Metallic Material
 316L stainless steel
O-Ring Material
 EPDM
Power
 25 V DC
0.1 A
Process Connection
 Pg 13.5
Sensor Length
 220 mm
Wetted membrane material
 PTFE
Connector Design
 Straight
Model Family
 InPro 6860i
Autoclavable/Sterilizable
 Yes
Mechanical Temp. Range
 -4 °F
284 °F
Cable Connector
 VP6 / VP8 (analog / digital)
Hygienic/Biocompatibility Approvals
 FDA/USP Class 7
Hazardous Area Approvals
 ATEX/IECEx: II 1/2G Ex ia/ib HC T6 Ga/Gb II1/2D Ex ia/ib nie T83 °C Da/Db
Certificates & Approvals
 Quality certificate, Material certificate 3.1, Surface finish certificate, ATEX/IECEx certificate, FDA/USP Class IV
Measurement Range
 0–60 % O2 saturation
Sterilizable/Autoclavable
 Yes

Watch the video on the Anti-Bubble OptoCap

Stable, Reproducible Yields

Achieving consistent batches and product quality requires reliable oxygen measurement. The hydrophilic surface finish and tilted tip of the oxygen sensor prevent measurement interference from bubble accumulation that can affect yield and product quality.

Hygienic and Durable Design

Avoiding biofouling and ensure a stable signal with the PTFE coating of the OptoCap™ oxygen-sensing element. This ensures that the InPro6860i/12/220/mA/HD has the durability to withstand multiple autoclaving and standard CIP / SIP cycles.

Uncompromising Reliability

This optical DO sensor offers the benefits and predictive diagnostics of Intelligent Sensor Management. Achieve faster start up with Plug and Measure technology. Increased system availability is provided by maintaining a stock of pre-calibrated sensors.

Exceptional Performance

The 220 mm InPro6860i/12/220/mA/HD reduces both handling time and running costs due to lower calibration and maintenance needs. This performance is achieved by an electrolyte-free, one-piece replacement part that is monitored by predictive diagnostics.

Dokumentasi

Learn more about InPro 6860i optical oxygen sensor

Datasheets

Intelligent Optical Oxygen Sensor Easy Handling – Exceptional Performance
Data Sheet: The Anti-Bubble Oxygen Sensor Noise-Free Measurement Signal
Continuous dissolved oxygen (DO) measurement is critical during fermentation and cell culture. The InPro 6860 i HD Anti-Bubble™ Oxygen Sensor is mecha...

Manuals

Operating Instructions: Optical O₂ Simulator
Instruction Manual: InPro 6000 Optical O2 Sensors
METTLER TOLEDO optical O2 sensors are intended solely for inline measurement of the oxygen partial pressure, as described in this instruction manual.

White Papers

Corrosion reduction
Corrosion Reduction with pH & O2 Control
This white paper provides educational content and shares practical expertise on corrosion and corrosion reduction in the chemical industry. It explain...

Studi Kasus

Reduce maintenance case study
Reduce Maintenance with Digital Sensors
This case study describes how Ajinomoto needed more dependable pH and DO sensors, plus less sensor maintenance, they turned to METTLER TOLEDO. Now, in...
Case Study on Optical DO Sensors in Fermentation
Optical DO Sensors in Fermentation
Novozymes is the world leader in the production of enzymes and has a global market share of more than 30%. Read in the case study how for Novozymes, o...

Aksesori

Alat Kalibrasi & Perawatan Sensor

iLink-RS 485 VP
This is a USB iSense adaptor for connecting ISM RS485 VP sensors to iSense for pH, DO and CO2 measurement and sensor calibration.

Material No.: 30014134

iLink Multi
A universal device for connecting both 1-wire and RS485 ISM sensors to a computer running iSense software.

Material No.: 30130631

CalBox

Material No.: 52300400

Integrasi Sensor Digital

Transmitter M100 SM RS-485

Material No.: 30365367

Consumable

Perangkat Lunak

Dapatkan Penawaran Anda
DO Sensor InPro6860i/12/220/mA/HD
FDA
USP Class VI