Optimax 1001 HFCal | METTLER TOLEDO

OptiMax Starter Kit and HFCal

Material No.: 511628301

optimax pg thumbnail
Hubungi untuk Harga
Spesifikasi - OptiMax Starter Kit and HFCal
Weight
35 kg
New Attribute (26)
60 mL – 1.000 mL
Dimensions (HxWxD)
78 cm x 39 cm x 42 cm
Rentang Suhu
-40 °C – 180 °C

New Attribute (4)
New Attribute (27)
New Attribute (38)
New Attribute (39)
Bahan

New Attribute (19)
New Attribute (18)

Dokumentasi

Datasheets

EasyMax (102, 102 LT, 402) HFCal and OptiMax HFCal Datasheet
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.

Brosur Produk

Chemical Synthesis Reactors Product Catalog
View the full catalog of chemical synthesis reactors, workstations, and accessories. Find what you need for your lab!

Informasi Lengkap Produk

OptiMax Operating Instructions
Guide on how to operate your OptiMax chemical synthesis workstation.
OptiMax Service
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...

Aksesori

Specifications

Thermostat 
HeatingElectrical
CoolingPeltier
Cooling Performance0°C   35 W 
20°C 65 W
40°C   95 W
Temperature Range-40°C to 180°C (jacket temperature)
Control Modesisothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization
Stirring30 rpm to 1200 rpm
DimensionsThermostat: 388 mm x 414 mm x 539 mm
Power Supply100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA
OperationiControl software for calorimetric applications
Graphical touchscreen and/or iControl Software
 
  
Reactors 
TypeSingle piece or two piece (with bottom drain valve)
Volume1000 mL
Pressure50 mbar to 1 bar
MaterialDuran® glass
StirrerPitch-blade (glass, Alloy 22)
Anchor (glass, Alloy 22)
Half-moon (PTFE for single piece reactor)
  
Calorimetry 
TypeHeat Flow
Calibration HeaterMax. 20 W
Precision Heat TransferTypically ± 3%
Accuracy and Precision Specific HeatTypically ± 10%
Accuracy Heat FlowTypically ± 3% to 5%, under isothermal conditions
Typically ± 5% to 10%, under non-isothermal conditions
Sensitivity≤0.1 W measured as standard deviation of qr under steady state conditions.
Peak-to-peak noise is ≤ approximately 0.4 W.
  
HFCal Module 
Power and Data InterfaceDirect connection to CAN interface of standard OptiMax,
no additional power supply or PC connection required
Data LoggingVia iControl Software
Dimensions120 mm x 40 mm x 170 mm
  
SoftwareiControl 5.2 or higher required, HFCal license

Consumable

Perangkat Lunak

Dapatkan Penawaran Anda
OptiMax Starter Kit and HFCal