Cap & Fill Level Vision Inspection Systems
V27 Series

Cap & Fill Level Vision Inspection Systems

Ensure proper cap application and integrity and guard against over or under-filled products

Cap inspection
Cap Inspection
Cap inspection
Cap Inspection

Típusok, műszaki adatok


Vision Inspection Guide

Útmutató a kamerás ellenőrzéshez
A kamerás ellenőrzési útmutató mindenre kiterjedő segédlet a kamerás ellenőrzési technológiák élelmiszer- és gyógyszeripari alkalmazásához.


ProdX adatkezelő szoftver
A ProdX lehetővé teszi a teljes termékvizsgálat-kezelési folyamathoz való csatlakozást és annak felügyeletét egyetlen pontból, illetve több távoli hel...


V31 Vision Inspection Datasheet
The V31 Oriented Line vision inspection system is pre-configured to provide a complete solution for common packaging and labeling defects.


Hatékony termékvizsgáló rendszer kiválasztása minőség-ellenőrzési alkalmazásokhoz
A tanulmány megmutatja, mi a legjobb módja az Ön igényeinek megfelelő termékvizsgáló rendszer kiválasztásának. Végigvezeti Önt azokon a fő területeken...
Understanding Regulations in Medical Device Labeling
A white paper outlining the key requirements for medical device labeling in the US, EU and China.


How does a missing cap actually happen?

There are plenty of reasons something can go wrong, particularly in a high-speed production environment. It could be an insufficient number of caps loaded into the filler, or an unexpected problem with the feed, or some other mechanical issue. It happens more often than you might think, and it is inevitably a headache for operators when it happens. Being able to instantly alert operators when caps start going missing is critical.

Do I need a stand-alone system to check for caps?

No, you really do not need a stand-alone system to check for caps. There are a couple ways to go about this, depending on what your priorities are. If you are only concerned with cap and fill level, you can integrate a smart camera (or a PC-controlled camera) into your existing filling equipment. We have experience with producing integrated solutions, and are happy to lend our expertise and equipment in setting something up. You can find out more about our custom solutions by contacting us or visiting our custom solutions page.

What else can I do while I'm inspecting caps?

The most convenient part of a vision inspection system is its ability to carry out simultaneous inspections of other package elements. A single shot of the package can be used to perform multiple inspections – most simply, a picture used for cap inspection can also ensure the presence of a tamper evident band (if one is used) and verify the fill level. Calibrated correctly, the same image can be used to perform inspections on the package label, although depending on the package shape it may be necessary to use a multi-camera configuration.

Can I inspect the fill level of opaque packages?

A vision-based system will not be able to perform such an inspection with any sort of reliability, although it can be possible depending on the level of opacity. Adding an x-ray element to the system makes such an inspection possible. This is an easy solution to the problem, particularly when dealing with a supplier that can provide both technologies in a way that ensures the software and hardware do not run into any compatibility issues.


Thank you for visiting We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing