M80 Sensor Mount Transmitter
ISM Solution for Benchtop Biocontrollers
The M80 Sensor Mount (SM) transmitter is a compact, single channel, multi-parameter transmitter designed especially for benchtop biocontroller manufacturers who want to take advantage of Intelligent Sensor Management (ISM) features on SCADA systems.
Compact Size for Benchtop Bioreactors
The small footprint of the M80 SM allows mounting on ISM sensors used in bioreactors with a typical volume of 1-20 liters.
Easy Integration of Sensor Data
A Modbus RTU interface enables direct integration of sensor measurement data, diagnostics and calibration routines into the biocontroller.
Transparent Sensor Health Information
Visualization of ISM features on your controller's graphical user interface increases transparency of sensor models and health status.
|Analóg vagy ISM||ISM|
|Mérési paraméterek||pH, CO₂, DO, Conductivity|
|Tápellátás||24 VDC (min. 100mA), 8-30 VDC (min. 2W)|
|Operating temperature range (imp)||5 to 140° F|
|Operating temperature range (metric)||-15 to 60° C|
|Relative Humidity||5 - 95% rH (non-condensing)|
|Felszerelés||AK9 connector on head of 1-wire sensor|
|Cable Connection||M12/5-pin for RS485 interface and power supply|
|Kommunikáció||Modbus RTU Protocol|
|Configuration||Via M80 SM Transmitter Configuration Tool PC software and transmitter configuration box|
|Sensor Dimensions (imp)||Height: 3.7" </br>Diameter: 0.87"|
|Sensor Dimensions (metric)||Height: 94 mm </br>Diameter: 22 mm|
|Veszélyes terület besorolás||No hazardous area certification|
Features and Benefits
|Robust Process Control|
Processes run more reliably when digital sensors are integrated into control loops. The M80 SM allows you to access the predictive diagnostics and easy set-up features of ISM sensors on your biocontroller for more robust cell culture and fermentation runs.
|Scalable ISM Solution for R&D|
The small footprint of the M80 SM transmitter enables its use on benchtop bioreactors. This allows you to employ the advantages of ISM sensors that are often used in production, in your R&D and in down-scaling applications as well.
|Reduce Configuration Efforts|
The need for sensor configuration is eliminated when a digital analytical sensor is replaced by a new one. The M80 SM stores installation point specific data such as Modbus address and baud rate, reducing time and effort during sensor replacement.
pH sensors must be disposed of on a regular basis. Compared to pH sensors with a built-in transmitter, the M80 SM helps to reduce electronic waste by up to 60%. The detachable, reusable M80 ensures you are not throwing out a transmitter with each sensor.