Transmitter M100 2H DR

Transmitter M100 2H DR

High Performance with a Small Footprint.The M100 DR is a DIN rail mounted single-channel, 2-wire process transmitter that supports multiple parameters and HART communication. It is compatible with pH/ORP, pH/pNa, DO and conductivity sensors.

Low Installation Cost

M100 DR is an easy-to-commission 2-wire transmitter for installations where space is at a premium.

Predictive Maintenance

Access to ISM predictive diagnostic tools available over HART leads to reduced maintenance and increased process uptime.

Plug & Measure Operation

With iSense software, sensors can be calibrated via a PC or mobile device, then connected to the M100 without the need to recalibrate.

Cikkszám: 30127720

Hívjon minket ajánlatért
Specifikációk - Transmitter M100 2H DR
Paraméter(ek)
pH
Szenzor típusa
Digitális
Áramkimenet(ek)
Analóg bemenetek
Digitális bemenet
1
Kommunikáció
HART
Tanúsítványok veszélyes környezetben történő használatra
Nem
Tanúsítványok (2)
CE megfelelőség
Vezetékes mód
Áramforrás
Felhasználói felület
Relék száma
Nema
PID vezérlő
Csatornaszám
1
Készülékház anyaga
PA-FR
Ipari védettségi besorolás
IP20
USB-interfész
Méret
Elsődleges közegek/alkalmazás
Vegyipari folyamatok
Egyéb ipari folyamatok
Modellcsalád
M111

Small Footprint

The M100 DR is designed to be DIN rail mounted. It is suitable for 35 mm wide DIN rail systems, and gives you the functionality that you require for control, without a local display.

Integration & Control via HART

The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.

Easy-to-Analyze Indicators

The M100 DR is outfitted with two LEDs to clearly indicate transmitter and sensor status, and to communicate alarms and warnings visually to on-site maintenance staff.

Documentation

Adatlapok

Data Sheet for M100 DIN Rail Transmitter
DIN Rail transmitter, high performance and minimal space requirement.

Műszaki specifikációk

Technical Data: M100 DR DIN Rail Transmitter for pH/ORP, pH/pNa, Oxygen and Conductivity
The M100 DR DIN rail transmitter is a 2-wire transmitter with HART® communication capability for analytical measurements. The M100 DR is a single-chan...

Manuals

Operating Instructions: DIN Rail Transmitter M100 DR
These operating instructions offer important notes on handling of the M100 DR transmitter of METTLER TOLEDO. A prerequisite for safe work is complianc...
Gyorsbeállítási útmutató Távadó M100 Mérőfejre szerelt változat
Az M100 egy 2 vezetékes, mérőfejre szerelhető távadó analitikai mérésekhez, HART csatlakozási lehetőségekkel. Az M100 egy egycsatornás, többparamétere...

Bus Communication Info

Tartozékok

Fogyóeszközök

Szoftver

Ajánlatot kérek
Transmitter M100 2H DR
Hazardous Area
FM Approved
FDA