TGA/DSC 3+ - Thermogravimetric Analyzer with large furnace (LF) - Áttekintés - METTLER TOLEDO

TGA/DSC 3+ - Thermogravimetric Analyzer with large furnace (LF)

Swiss Quality

Hívjon minket ajánlatért

The heart of a TGA is the balance cell. Our TGA instruments use the world’s best METTLER TOLEDO micro and ultra-micro balances. The internal calibration ring weights ensure unsurpassed accuracy. Thanks to the parallel-guided balance the position of the sample does not influence the weight measurement. Built-in user selectable automatic buoyancy compensation eliminates the need for time-consuming baseline measurements. Small samples close to the low end of the weighing range are also weighed accurately because of a low minimum weight.

By using one of the many removable sensor types the TGA/DSC 3+ simultaneously measures heat flow in addition to the weight change.

High temperature effects up to 1600 °C can be measured with a TGA equipped with the HT furnace

Specifikációk - TGA/DSC 3+ - Thermogravimetric Analyzer with large furnace (LF)
Hőmérséklet-tartomány RT to 1100 °C
Heating rate 0.02 to 150 K/min
Crucible volume Up to 900 µL
Dynamic weighing range 1/5 g (depending on balance model)
Balance resolution 0.1/1 µg (depending on balance model)
Weighing accuracy 0.005%
Weighing precision 0.0025%

Innovative Technology

 

Features and Benefits of the TGA/DSC 3+ - Thermogravimetric Analyzer with large furnace (LF)

 

METTLER TOLEDO ultra-micro balance – rely on the leader in balance technology
Wide temperature range – analyze samples from ambient temperature to 1600 °C
DSC heat flow measurement – for simultaneous detection of thermal effects
Built-in gas flow control – investigate your samples in defined atmospheres
Automated TGA-FTIR, TGA-MS and TGA-GC/MS systems – perform accurate evolved gas analyses using FTIR and MS
Robust, factory endurance-tested sample robot – operate efficiently and reliably around-the-clock
Modular concept protects your investment – fits to your current and future needs

 

Dokumentáció

Termékismertetők

Brochure: TGA/DSC 2
Thermogravimetry (TGA) is a technique that measures the change in weight of a sample as it is heated, cooled or held at constant temperature. Its ma...
Brochure: STARe Excellence Software
Thermal analysis is a well-established analytical method that is widely used in many different fields. It provides laboratories with valuable results...
The Future of Thermal Analysis Brochure
Thermal Analysis comprises a group of techniques that measure the physical or chemical properties of a sample as a function of temperature or time whi...

Adatlapok

Datasheet: TGA-Sorption System
The TGA-Sorption System allows you to precondition samples at temperatures up to 150 °C and to increase or decrease the relative humidity continuously...
Datasheet: DSC Evaluation
This software option reduces unnecessary measurement time and improves safety when measuring unknown samples. It enables the instrument to terminate a...
Datasheet: TGA-EGA
TGA-MS, TGA-FTIR, TGA-GC/MS and TGA-Micro GC/MS are powerful techniques that yield both quantitative (mass analysis, absorbance) and qualitative (iden...
Datasheet: STARe Software Option Mathematics
This software option offers a number of useful calculations that can be applied to curves for advanced evaluation possibilities, adding even more flex...
Datasheet: Specific Heat Evaluation
The specific heat capacity cp is an important material property often used in calculations of thermal processes in the chemical industry. It describes...
Datasheet: Conditional Experiment Termination
This software option reduces unnecessary measurement time and improves safety when measuring unknown samples. It enables the instrument to terminate a...
Datasheet: nth Order Kinetics
Kinetic models are suitable for the analysis and simulation of chemical reactions. The software option calculates kinetic parameters based on one or m...
Datasheet: Model Free Kinetics
Model Free Kinetics (MFK) allows you to predict reaction behavior under different conditions, where measurements are difficult to perform or where the...
Advanced Model Free Kinetics Datasheet
STARe software’s Advanced Model Free Kinetics (Advanced MFK) program helps in the investigation and optimization of a process. It allows the predictio...

Manuals

Tartozékok

Support

Kimagasló szervizszolgáltatás

A METTLER TOLEDO értékes segítséget nyújt abban, hogy megismerje a legújabb fejlesztéseket, és széleskörűbb tudással rendelkezzen, ha

 

olvassaa UserCom újságot.

Népszerű, műszaki témájú olvasói magazinunkban a felhasználók és a specialisták publikálják alkalmazásaikat különböző területekről.

 

részt veszwebes szemináriumainkon.

Konzultáljon specifikus témákról szakértőkkel.

 

 

megtekintispecialisták számára készült kézikönyveinket.

Termoanalitikai felhasználók számára készült, háttérinformációkat, elméletet és gyakorlatot, anyagjellemzőket ismertető hasznos táblázatokat és számos érdekes alkalmazást tartalmaz.

 

fejleszti termoanalitikai képességeit.

A webes oktatás a gyors és kényelmes tanulás hatékony módszere.

 

keresgél az adatbázisunkban.

Ha alkalmazásspecifikus kérdése van, lehetséges, hogy megtalálja a választ az alkalmazási adatbázisban.

 

 

egy csoportban tanul.

A csoportos tanulás még mindig a tanulás egyik leghatékonyabb módja.

 

tájékozódik –akár még út közben is.

Mindenféle termoanalitikai információhoz és szolgáltatáshoz hozzáférhet mobil eszköze segítségével.

megnézi a videókat.

Új technikai videóink a termoanalitikai műszereket és a STARe szoftvert érintő komplex problémákat mutatnak be.

 

 

Ajánlatot kérek
TGA/DSC 3+ - Thermogravimetric Analyzer with large furnace (LF)