Water Panel Transmitter Configuration

Pure and ultrapure water systems often require several transmitters on each water panel to monitor the various measurements needed to effectively manage a water purification application. Typically, each of these water panel transmitters needs to be individually programmed manually through a tedious, time-consuming, button-pushing process. And this series of configuration steps needs to be followed on each transmitter any time an update is required.

Entering a repeated sequence of button-pushes creates a risk of human error, and this risk can be compounded when multiple application engineers are configuring multiple water panel transmitters with their own operator preferences.

To help eliminate these challenges, METTLER TOLEDO introduced the TCT with our family of transmitters, including the M800 multi-parameter transmitter models. The TCT is designed to help ensure that your transmitters are all programmed identically and with the least amount of effort.

With the TCT you can simply take your laptop to the transmitter, plug in a cable and download the configuration from one instrument onto your computer. Then you can quickly upload that configuration to each transmitter where it is required, be it on one or multiple water panels.

Alternatively, you can program a transmitter at your desk, and then store that configuration and bring it to all of your transmitters in the field. This is a time-saving solution for system fabricators, system integrators and any key transmitter users.

In addition, with the TCT for the M800, M300 and M200 you can save multiple water panel transmitter configurations to your computer to build a library of configurations for each specific application, or as backup in case of system failure.

Read about the TCT in our free white paper.