Transmitter M100 2XH M20
Small Footprint for Hazardous Areas.The M100 HM is a single-channel, multi-parameter transmitter that is mounted directly over the sensor electronics via an M20 connection. It's compatible with pH/ORP, pH/pNa, oxygen, and conductivity sensors and supports HART communication.
Designed for Challenging Environments
The M100 is an explosion proof/flameproof transmitter with intrinsically-safe electronics, providing accurate measurement in hazardous environments.
Access to ISM predictive diagnostic tools available over HART leads to reduced maintenance and increased process uptime.
Plug & Measure Operation
With iSense software, sensors can be calibrated via a PC or mobile device, then connected to the M100 without the need to recalibrate.
| Sensor Type||ISM|
| Current Output(s) Digital Output||1 x 0/4-20mA|
| Analog Inputs||1|
| Inputs (2)||1|
| Hazardous Area Approvals||Yes|
| Approvals and Certificates||cCSAus Cl.I Div.1|
| Wired Mode||2-Wire|
| Power Supply||14-30 VDC|
| User Interface||None|
| Relay Contact(s)||None|
| PID Controller||None|
| Enclosure Material||Stainless Steel|
| Protection Rating||IP66|
| USB Interface||No|
| Size||Sensor Mount|
| Primary Media/Application||Other Industrial Processes|
| Broj artikla||30026578|
Intrinsically Safe Design
The M100 HM is designed to be mounted directly to the sensor. The stainless steel housing is explosion proof/flameproof and the electronics are intrinsically safe, providing a safe, accurate measurement.
Integration & Control via HART
The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.
The M100 HM is mounted directly on the head of the sensor, and has neither a local display nor operator interface. This allows for a compact measurement point that can be installed in both hazardous and non-hazardous areas.