Transmitter M100 2H DR

Transmitter M100 2H DR

High Performance with a Small Footprint.The M100 DR is a DIN rail mounted single-channel, 2-wire process transmitter that supports multiple parameters and HART communication. It is compatible with pH/ORP, pH/pNa, DO and conductivity sensors.

Low Installation Cost

M100 DR is an easy-to-commission 2-wire transmitter for installations where space is at a premium.

Predictive Maintenance

Access to ISM predictive diagnostic tools available over HART leads to reduced maintenance and increased process uptime.

Plug & Measure Operation

With iSense software, sensors can be calibrated via a PC or mobile device, then connected to the M100 without the need to recalibrate.

Broj artikla: 30127720

Zahtjev za ponudu
Specifikacije - Transmitter M100 2H DR
Parametri
pH
Conductivity
Otopljeni kisik
ORP
Tip senzora
ISM
Izlazna struja(e)
Analogni ulazi

1
Komunikacija
HART
Odobrenja za opasna područja
Ne
Odobrenja i certifikati
CE usklađenost
Žičani način rada
Napajanje {2}
Korisničko sučelje
Kontakt(i) releja
Nema
PID regulator
Nema
Kanali
1
Materijal kućišta
PA-FR
Oznaka zaštite
IP20
USB sučelje
Veličina
Primarni mediji/primjena
Kemijski procesi
Drugi industrijski procesi
Obitelj modela
M119

Small Footprint

The M100 DR is designed to be DIN rail mounted. It is suitable for 35 mm wide DIN rail systems, and gives you the functionality that you require for control, without a local display.

Integration & Control via HART

The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.

Easy-to-Analyze Indicators

The M100 DR is outfitted with two LEDs to clearly indicate transmitter and sensor status, and to communicate alarms and warnings visually to on-site maintenance staff.

Documentation

Letak proizvoda

Data Sheet for M100 DIN Rail Transmitter
DIN Rail transmitter, high performance and minimal space requirement.

Tehnička specifikacija

Technical Data: M100 DR DIN Rail Transmitter for pH/ORP, pH/pNa, Oxygen and Conductivity
The M100 DR DIN rail transmitter is a 2-wire transmitter with HART® communication capability for analytical measurements. The M100 DR is a single-chan...

Manuals

Operating Instructions: DIN Rail Transmitter M100 DR
These operating instructions offer important notes on handling of the M100 DR transmitter of METTLER TOLEDO. A prerequisite for safe work is complianc...
Quick Setup Guide Transmitter M100
The M100 is a 2-wire head mount transmitter for analytical measurements with HART communication capabilities. The M100 is a single-channel, multi-para...

Bus Communication Info

Dodatna oprema

Potrošni materijal

Softver

Zatražite ponudu
Transmitter M100 2H DR
Hazardous Area
FM Approved
FDA