XPE Micro Analytical Balances from METTLER TOLEDO
XPE Micro Analytical

XPE Micro-analytical Balances

Higher capacity for dosing directly into your target vessel.

XPE Micro Analytical SmartGrid. Unique 50 g capacity – weigh directly into tare vessels.

XPE Micro Analytical balances are the only balances in the world with a hanging weighing pan. With minimal air turbulence in the weighing chamber, ...

XPE Micro Analytical balances are the only balances in the world with a hanging weighing pan. With minimal air turbulence in the weighing chamber, stabilization time is reduced and results are faster. XPE micro-analytical balances have motorized doors on both the outer and the smaller inner draft shields. It’s easy to set up one SmartSens sensor to open both sets of doors for when you want to place your tare container on the balance – just wave your hand over it to activate. To keep air disturbance to a minimum for dosing, the other sensor can be used to open just the outer door. Left and right dosing possible.


Highest Capacity XPE Micro-analytical Balances
XPE Micro, Balance Ready
Minimizes Static Charges
Unmatched Speed and Stability
XPE Micro, User guided workflow management

Products and Specs

 
Products and Specs
Filter:
Set filter
Clear All
 
Maximum Capacity
Readability
Minimum Weight (USP, 0.1%, typical)
Repeatability (Test Weight)
Linearity ±
Material No.: 30105893
See details
Maximum Capacity22 g
Readability1 µg
Minimum Weight (USP, 0.1%, typical)1.4 mg
Repeatability (Test Weight)0.0015 mg (1 g)
Linearity ±0.006 mg
Settling Time3.5 s
Dimensions (DxHxW)487 mm x 322 mm x 263 mm
Weighing Pan Dimensions (DxW)40 mm x 40 mm
Material No.: 30105897
See details
Maximum Capacity22 g/5.1 g
Readability0.01 mg; 2 µg
Minimum Weight (USP, 0.1%, typical)2.4 mg
Repeatability (Test Weight)0.002 mg (1 g)
Linearity ±0.01 mg
Settling Time2.5 s
Dimensions (DxHxW)487 mm x 322 mm x 263 mm
Weighing Pan Dimensions (DxW)40 mm x 40 mm
Material No.: 30105904
See details
Maximum Capacity52 g
Readability1 µg
Minimum Weight (USP, 0.1%, typical)1.4 mg
Repeatability (Test Weight)0.0015 mg (2 g)
Linearity ±0.02 mg
Settling Time3.5 s
Dimensions (DxHxW)487 mm x 322 mm x 263 mm
Weighing Pan Dimensions (DxW)40 mm x 40 mm
Material No.: 30105932
See details
Maximum Capacity52 g/11 g
Readability0.01 mg; 2 µg
Minimum Weight (USP, 0.1%, typical)2.4 mg
Repeatability (Test Weight)0.002 mg (2 g)
Linearity ±0.03 mg
Settling Time2.5 s
Dimensions (DxHxW)487 mm x 322 mm x 263 mm
Weighing Pan Dimensions (DxW)40 mm x 40 mm
Comparison

Documentation

White Papers

Electrostatic Charges During Weighing
Static can cause unreliable weighing results. Effects can be minimized using innovative automatic static detection.

Datasheets

Datasheet : Reliable Results for Years to Come
Are your samples very valuable? Are they only available in small quantities or effective in just the tiniest of doses? Or perhaps you want to weigh wi...

Installation Instructions

User Manual : Micro Balances XPE26/XPE56/XPE56Q models
Easy reference guide to help you quickly set-up and start using your balance.
Operating Instructions : Micro Balances XPE26/XPE56/XPE56Q models
Full instructions and technical guidance for safe and correct usage of your balance.
User Manual : Pipette Calibration Balances XPE26PC
Easy reference guide to help you quickly set-up and start using your balance.
Operating Instructions : Pipette Calibration Balances XPE26PC
Full instructions and technical guidance for safe and correct usage of your balance.
Installation Instructions: ErgoClip Weighing
Case ErgoClip Weighing Solution Kit Micro
Installation Instructions: ErgoClip Basket Micro
ErgoClip Basket Micro for Micro Balances XP26/XP56, XPE26/XPE56
Installation Instructions: ErgoClip Flask Micro
ErgoClip Flask Micro for Micro Balances XP26/XP56, XPE26/XPE56
Installation Instructions: ErgoClip Tube Micro
ErgoClip Tube Micro for Micro Balances XP26/XP56, XPE26/XPE56
Installation Instructions: Evaporation Trap
Evaporation Trap for XP26/XPE26, XP56/XPE56
Installation instructions: MinWeigh Door
MinWeigh Door Micro for XP26/XPE26 & XP56/XPE56 Microbalances
Installation instructions: Weighing Table
Weighing Table XP26/XPE26, XP56/XPE56
Installation instructions: Weighing Table
Weighing Table XP26PC/XPE26PC
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.