Calibration with Robotic Mass Comparators
Livre Blanc

Calibration with Robotic Mass Comparators

Livre Blanc

Maximizes security and delivers the highest accuracy in mass calibration

Calibration with Robotic Mass Comparators
Calibration with Robotic Mass Comparators

Robotic mass comparators are used for the calibration of weights that can handle a large number of weights. It maximizes security and delivers the highest accuracy in mass calibration. METTLER TOLEDO cooperated on developing and designing the first commercially available robotic system for weight calibration that was introduced in 1999.

Robotic mass comparators are typically used by national institutes, calibration laboratories and weight producers to calibrate all weight classes from 0.05 milligrams up to 20 kilograms. A robotic system delivers better accuracy and performance than a manual comparator.

The installation of a robotic comparator system brings many benefits to its users, including:

  • Fewer errors
  • Minimized uncertainty
  • Simplified dissemination
  • Protection of valuable reference weights
  • Cost optimization
  • Boosted performance and throughput
  • Highest accuracy
  • Increased reliability

 

To meet the requirements of calibration managers and metrologists, many factors have to be considered by the operator and manufacturer. Our white paper gives you an overview of robotic mass comparators and the relevant factors which must be taken into consideration.

Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.