发现大规模生产和安全的问题
OptiMax™HFCal提供简化的信息，以表征和放大过程，确保其大规模生产时的安全。
了解过程参数
等温和非等温条件下获取的热量数据可用于表征类工艺条件下的工艺参数。
简单而准确的量热法
即插即用型量热模块可精准测定热量信息。
物料号: 511628301
| 重量 | 35 kg |
| 操作体积 | 60 mL – 1,000 mL |
| 外形尺寸 (高x宽x深) | 78 cm x 39 cm x 42 cm |
| 温度范围 | -40 °C – 180 °C |
| 后/前灯 | 是/是 |
| 热传递精确性 | 通常为 +/- 3% |
| 比热准确性和精确性 | 通常为 +/-10% |
| 热流准确性 | 等温条件： ± 3 % 至 5 % 基于 qr_hf 与 qc、以及∫qr_hf 与 ∫ qc 之间的比较 非等温条件： ± 5 % 至 10% |
| 量热法类型 | 热流 |
| 材料 | OptiMax入门套件（51162830）和OptiMax HFCal升级套件（30050150） |
| 温度模式 | Tj模式，Tr模式，蒸馏模式，结晶模式 |
| 升温/降温 | ≤ +/- 0.05 W -25° 至 160°，以 qr 的标准偏差测量 |
| 电源要求 | 100-240 VAC, 50/60Hz |
更快的生产过程开发
同时表征反应参数并收集热量信息。热量信息与实时分析数据的结合为科学家提供了安全的大规模生产的相关信息。
准确的加热和冷却机制
强大的加热和快速冷却机制与独特的控制算法相结合，确保即使突发放热反应，温度也能准确地保持在-40°C至180°C之间。
准确的数据分析
仅需单击一下，iControl软件就将自动计算并报告热传输数据、反应物料的比热、热流和反应焓。
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |
