M300 Water 2-channel Transmitter, ½ DIN, ¼ DIN
Specifications - M300 Water 2-channel Transmitter, ½ DIN, ¼ DIN
|ISM||Plug and Measure, predictive diagnostics (DLI ACT TTM), iMonitor|
|Power Supply||100 to 240 VAC 50/60 Hz 10VA|
20 to 30 VDC 10VA
|Current Outputs||4 for 2-channel versions (2 for 1-channel versions)|
0/4 to 20mA, 22mA alarm, galvanically isolated
|Relays||2 SPST, mechanical, 250 VAC or 30 VDC, 3A|
2 SPST, Reed, 250 VAC or 250 VDC, 0.5A, 10W
|Digital Inputs||2 for 2-channel versions (1 for 1-channel versions)|
|User Interface||4.0" TFT b/w touchscreen, 320x240 pixels|
|USB Interface||1 USB host: data logging, loading or saving configuration|
1 USB device: software update interface
|Protection||½ DIN: IP65; ¼ DIN: IP65 (front) IP20 (rear)|
|Sensor Type||Analog or ISM|
|Parameters||pH/ORP, Conductivity, DO, Ozone|
Features and Benefits
- Multi-parameter transmitters as one or two channel models accept analog sensors and ISM sensors.
- Exceptional user friendly operation with a touch-screen and a clear display of important information.
- Error-free Plug and Measure plus the connection of pre-calibrated sensors allow fast measurement setup.
- ISM predictive maintenance features provide sensor diagnostics and reduce maintenance efforts.
In some processes in the food & beverage industry conductivity is measured to control the separation of two non-mixable liquid phases or two liquids w...
Biological industrial wastewater treatment Biological processes are being more and more used to treat wastewater effluents, instead of chemical and m...