Triax RDS 13415 pellets (a blend of ABS, polyacrylonitrile-butadiene-styrene, with polyamide 6)
Flexovac-Multi (laminated film of PE and PA6)
Measuring cell: DSC20
Pan: Aluminum standard 40 μl, pierced lid
Sample preparation: Disk cut from pellet and punched out of film
Sample mass: ABS/PA6 blend 9.4 mg, Flexovac 9.0 mg
DSC measurement: Heating from 30 to 280 C at 20 K/min (Triax), and from 50 to 300 C at 10 K/min (Flexovac)
Atmosphere: Nitrogen, 50 cm3/min
The heat of fusion of PA6 is approx. 45 J/g (typical for PA6). Both samples give values of 20 J/g, Their PA6 content is therefore approx. 44% assuming that their crystallinity is the same. The calculation of the content is performed automatically if the reference value for the heat of fusion is entered beforehand. In a similar way, the PE content of Flexovac is determined by 59%.
Polyamide 6 Blends | Thermal Analysis Handbook No.HB233 | Application published in METTLER TOLEDO TA Application Handbook Thermoplastics