Need assistance?
Our team is here to achieve your goals! Speak with our experts.

Axle Scale and Weighing Solutions

For Chain of Responsibility Compliance

METTLER TOLEDO’s range of axle weighing solutions are engineered to suit a variety of vehicle weighing requirements, from single axle weighing through to dual, tri or even quad axles. Each solution has been designed to capture and accumulate data accurately and efficiently to assist with Chain of Responsibility compliance.

Call for Quote

AxlePass™ Weigh-in-Motion Axle Weighbridge

Weigh more vehicles in less time with a AxlePass™ weigh-in-motion weighbridge. This economical solution captures axle and gross weights of vehicles moving at speeds of up to 10 km/h. By eliminating the need to stop each vehicle, an AxlePass™ weighbridge weighs the same number of vehicles as five static scales, in a fraction of the time and at a fraction of the cost. AxlePass™ can deliver in-motion weighing accuracy within 1.0% of the true weight.

Axle Scale
Axle Scale

Roll On Weigh-in-Motion Axle Weighbridge

The unique design of METTLER TOLEDO’s Roll On Weigh-in-Motion Axle Weighing solution can be installed without expensive concrete foundations, considerably reducing your construction costs. The in-ground design makes it easy for vehicles to enter and exit the axle weighbridge without stopping, traveling at a constant speed of less than 25 km/h.

Axle Scale and Weighing Solutions
Weigh-in-Motion axle Weighbridge

In-Ground Axle Weighbridge

The in-ground axle weighing solution from METTLER TOLEDO enables bi-directional entry for easy and efficient vehicle weighing. The structure includes the unequalled reliability of POWERCELL PDX load cells. With their robust, stainless steel construction, POWERCELL PDX load cells provide 100% protection against the forces that can eat into your profits, including extreme temperatures, lightening strikes, water and floods, rodents, and rust and corrosion.

Axle Scale
Axle Scale

Multi-Deck Axle Weighbridge

METTLER TOLEDO’s multi-deck axle weighbridge uses multiple independent weighing modules to simultaneously calculate a vehicle’s total gross weight, providing accurate data fast without repositioning the vehicle. By calculating the weight of each axle group, the weighbridge can assist your company with Chain of Responsibility compliance.

The multi-deck weighbridge comes with either a steel or concrete deck and features orthropic ribs and POWERCELL PDX load cells to provide many years of accurate and reliable weighing.

Axle Scale and Axle Weighing Solutions
Axle Scale and Axle Weighing Solutions

Multi-Deck Axle Weighbridge

FeatureSpecification
Deck constructionReinforced concrete or steel construction
Weighbridge width (standard)3 m, 3.4 m
Weighbridge length4 m to 50 m +
Lightning protection (tested)Lightning Technologies tested - 100 000v,
   80 000 A (POWERCELL PDX)
Weighing componentsStainless Steel
Load cellsHi-performance POWERCELL PDX
Load cell protection classIP68, IP69k; NEMA 6p
Capacity30/50/60/80/100 t
Maximum rated axle load23.5 t tri axle over 1.2 m axle spacing
Operating temperature-60° c to + 50° c (-76° F to 122° F)
Temperature EC/94/EEC-10° c to + 40° c (4° F to 104° F)
Side railsAbove ground solutions only
Easy access to load cellsYes
Unmanned operationDriver Control Station (DCS)

Weigh-in-Motion Axle Weighbridge

FeatureSpecification
Deck constructionSteel construction
Weighbridge width (standard)3.2 m
Weighbridge length0.8 m
Weighing componentsStainless Steel
Load cell protection classIP68, IP69k; NEMA 6p
Capacity30/50/60/80/100 t
Maximum rated axle load23.5 t tri axle over 1.2 m axle spacing
Operating temperature-60° c to + 50° c (-76° F to 122° F)
Temperature EC/94/EEC-10° c to + 40° c (4° F to 104° F)
Side railsAbove ground solutions only
Easy access to load cellsYes
Unmanned operationDriver Control Station (DCS)

 

 

In-Ground Axle Weighbridge

FeatureSpecification
Deck constructionReinforced concrete or steel construction
Weighbridge width (standard)3 m, 3.4 m
Weighbridge length4.8 m to 50 m +
Lightning protection (tested)Lightning Technologies tested - 100 000v,
   80 000 A (POWERCELL PDX)
Weighing componentsStainless Steel
Load cellsHi-performance POWERCELL® PDX®
Load cell protection classIP68, IP69k; NEMA 6p
Capacity30/50/60/80/100 t
Maximum rated axle load23.5 t tri axle over 1.2 m axle spacing
Operating temperature-60° c to + 50° c (-76° F to 122° F)
Temperature EC/94/EEC-10° c to + 40° c (4° F to 104° F)
Easy access to load cellsYes
Unmanned operationDriver Control Station (DCS)

 

Documentation

Product Brochures

Case Studies

Removing the Blindfold of Traditional Maintenance Management
Modern weigh modules provide predictive maintenance. This means machine builders can become more competitive by offering machines with higher overall...
Accurate Scales Protect Against Losses
In every country, legal-for-trade laws allow some margin of error when determining the required accuracy of truck scales. To protect against product a...
Optimized Loads Reduce Fuel Use
Sustainability in the world of heavy transport means getting the most out of every load. By utilizing the maximum legal capacity of each truck, compan...

Datasheets

Accessories

Get Your Quote
Axle Scale and Weighing Solutions