Cleaning System EasyClean 500X

Name: Cleaning System EasyClean 500X
Brand: Mettler Toledo

The EasyClean 500X is used for fully automatic cleaning and calibration of pH, ORP or oxygen measurement points. The EasyClean 500X series is approved for automated cleaning and calibration in hazardous areas.

Material No.: 30900560

Up to 80% Lower Maintenance

The only technician intervention on an EasyClean 500X system is periodic refilling of cleaning and buffer solutions, plus occasional sensor exchanges.

Reliable Process Control

Automated sensor maintenance with the EasyClean 500X and ISM's predictive diagnostics ensure reliable measurements and process consistency.

Keeps Employees Safe

Automated maintenance limits personnel's exposure to health-hazardous environments, helping to keep them safe.

For High-Maintenance Measurement Points

Some maintenance-intensive measurement points in harsh process conditions are too expensive to operate. The EasyClean 500X cleans the sensors automatically as often as required, making such measurement points economically viable.

Leverage the Power of ISM

The system leverages the Intelligent Sensor Management (ISM) platform, including error-free plug-and-measure sensor installation, automatically triggering of calibration whenever it is required, and precise data on when the sensor will need replaced.

Expert Servicing

Installation and regular system maintenance by METTLER TOLEDO Service experts help ensure the EasyClean 500X is always running exactly as it should - without disruption.

Specifications - Cleaning System EasyClean 500X

Operating pressure for retractable housing	0.4 - 0.8 MPa (4 - 8 bar 58 - 116 psi)
Protection Rating	IP 65
Rinsing	Yes
Cleaning	Yes
Calibration	Yes
Compressed Air Supply	0.4 - 1 MPa (4 - 10 bar 58 - 145 psi)
Parameter(s)	pH / ORP/ DO
Ambient Temperature	2 °C – 55 °C 35.6 °F – 131 °F
Power Supply	15V - 30 V (Safety barrier required, [EX ib Gb]), Ui=30V, Iimax=100mA, Pimax=800mW)
Model Family	EasyClean 500X
Pressurized Water	0.2 - 0.6 MPa (2 - 6 bar 29 - 87 psi)
Approvals and Certificates	ATEX / IECEx Zone 1 CE compliant FM Class I, Zone 0 NEPSI Ex Zone 1 cCSAus Class I, Zone 0
Enclosure Material	316L Stainless steel

Datasheets

DataSheet: Easyclean 500X

EasyClean 500(X) is a compact cleaning and calibration system for fully automated routine maintenance of process analytical sensors. The EasyClean 500...

Manuals

Quick Setup Guide EasyClean 500(X)

The EasyClean 500(X) is a controller for fully automated cleaning and calibration of pH/ORP and oxygen measurements.

Instruction Manual Easy Clean 500x

The making of the EasyClean 500(X) uses the best technology and obeys all the safety regulations in force. The EasyClean 500(X) is a controller for fu...

Brochures

Brochure: EasyClean Systems

Buffers for In-Line pH Sensors

Buffer pH 4.01 ACS red 5000ml

Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 4.01 buffer solution.

Material No.: 51319012

Buffer pH 7.00 ACS green 5000ml

Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 7.00 buffer solution.

Material No.: 51319016

Buffer pH 9.21 ACS blue 5000ml

Certified and traceable pH buffer solution for sensor calibration and verification in life science and industrial applications. This single container holds 5000 mL of pH 9.21 buffer solution.

Material No.: 51319017

Get Your Quote

Cleaning System EasyClean 500X

I want to…

Search suggestions