InPro 7108-TC-VP Conductivity Meter - Overview - METTLER TOLEDO

InPro 7108-TC-VP Conductivity Meter

4-electrode conductivity sensor for CIP/SIP applications.

The 4-electrode sensor InPro 7108-TC-VP is suitable for CIP/SIP applications in the Pharmaceutical and Food & Beverage industries as well as for other applications such as phase- or media separation. Simple installation via the 1.5" or 2" TriClamp flange. The sensor is sterilizable up to 140 °C. These sensors are specially designed and ruggedly built to withstand the most rigorous cleaning procedures. MaxCert™ makes your plant validation and qualification easy. All certificates for materials and the NIST/ASTM-traceable calibration are already included.
 

Specifications - InPro 7108-TC-VP Conductivity Meter
Max. pressure (bar) 17 bar (25 °C), 7 bar (95 °C)
Max. pressure (psi) 250 psi (77 °F), 100 psi (203 °F)
Meas. Range / Transmitter 0.02-650 mS/cm
Temperature range -10...140 °C (14...284 °F)
Temperature accuracy ±0.25 °C (25 °C)
Cell factor 0.25 1/cm (nominal)
Design SS316L
Sensor material PEEK (FDA)
O-rings, insulation PEEK (FDA)
Temperature sensor Pt1000
Segment /Application CIP/SIP control and phase separation
Description
The 4-electrode sensors from METTLER TOLEDO provide you with the highest degree of safety during CIP and SIP processes. Installed via common sanitary Tri-Clamp flanges, thorough, safe and easy cleaning is ensured. WideRange technology supports the measurement of samples with highly different conductivity values. The watertight (IP68) VarioPin connector ensures excellent signal transmission even under extremely humid conditions and direct water contact.
Features and Benefits
WideRange™ technology
  • Wide measuring range whilst maintaining a compact sensor design. This allows cost-saving installation and standardization in many applications.
 
Increased reliability
  • The IP68 rated VarioPin connector system ensures excellent and hassle-free signal transmission and stops problems associated with humidity. It also saves money compared to fixed cable installations.
 
MaxCert™
  • MaxCert™ makes your validation and qualification process easy. The NIST/ASTM-traceable calibration of the sensor is documented and material certificates (3.1B) are included for stainless steel or Hastelloy pins in contact with the media sample. For all other materials in contact with the media sample, a certificate according to EN 10204-2.1 for all FDA positive listed materials is included in the package and reference is made to CFR codes.
 

Documentation

Technical Datasheet

Datasheet Conductivity Sensors InPro7100
The InPro 7100(i) series is designed for the Chemical, Pharmaceutical, Food & Beverage and Pulp & Paper industries. The PEEK (FDA) shaft material offe...

Related Products and Solutions

Modular Transmitter M700
This modular transmitter offers flexible use of plug-in modules which enable combined measurements from digital and analog sensors, with a choice of b...
Transmitters
Multi-parameter transmitters for monitoring of key process and water analytical parameters such as pH, dissolved oxygen, conductivity and TOC.
Transmitters
Multi-parameter transmitters for monitoring of key process and water analytical parameters such as pH, dissolved oxygen, conductivity and TOC.
Transmitters
Multi-parameter transmitters for monitoring of key process and water analytical parameters such as pH, dissolved oxygen, conductivity and TOC.
Get Your Quote
InPro 7108-TC-VP Conductivity Meter

Accessories

Get Your Quote
InPro 7108-TC-VP Conductivity Meter
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.