InPro 7000-VP Conductivity Sensor - Overview - METTLER TOLEDO

InPro 7000-VP Conductivity Sensor

For accurate measurements of water purity.

The 2-electrode sensor InPro 7000-VP is extremely accurate and can be used in pure and ultrapure water applications. The wide measuring range allows this cell to be used in all applications with conductivity ranging from ultrapure water up to diluted salt solutions. METTLER TOLEDO 2-electrode sensors for the chemical industry are extremely accurate due to the factory determined and NIST/ASTM-traceable cell constant.

◄Previous Product
Conductivity Probes with 2/4 Electrodes
Next Product►
Specifications - InPro 7000-VP Conductivity Sensor
Cell factor 0.1 1/cm (nominal)
Meas. Range / Transmitter 0.02-10000 µS/cm
Temperature range -10...100 °C (14...212 °F)
Max. pressure (bar) 34 bar (25 °C), 7 bar (95 °C)
Max. pressure (psi) 500 psi (77 °F), 100 psi (203 °F)
Design Titanium
Sensor material PVDF
O-rings, insulation Viton® (FDA), PEEK (FDA)
Accuracy ±1.0 %
Temperature accuracy ±0.25 °C at 25 °C
Temperature sensor Pt1000
Segment /Application Pure and ultrapure water
VITON is a registered trademark of E. I. Du Pont de Nemours and Company Corporation
Description
The sensor can easily be installed in a customer supplied pipe-tee via the 3/4" NPT thread. The electrodes made of titanium allow to use this sensor in virtually all applications with conductivity values up to max. of 10 mS/cm.
Features and Benefits
Wide measuring range
  • WideRangeTM technology enables an almost universal use of this sensor starting from ultrapure water to drinking water and salt solutions. This allows standardization of your plant with one sensor type - cost savings and simple spare parts management included.
 
Increased process reliability
  • The IP68 rated VarioPin connector system ensures excellent signal transmission and avoids problems associated with humidity. This also saves money compared to fixed cable installations and makes handling much more comfortable.
 
Easy to install
  • Just screw the sensor into a pipe-tee via the 3/4" NPT thread.
 

Documentation

Related Products and Solutions

M300 Process 1-channel Transmitter, ½ DIN, ¼ DIN
M300 Process 1-channel Transmitter, ½ DIN, ¼ DIN
Modular Transmitter M700
Modular Transmitter M700
This modular transmitter offers flexible use of plug-in modules which enable combined measurements from digital and analog sensors, with a choice of b...
M300 Process 2-channel Transmitter, ½ DIN, ¼ DIN
M300 Process 2-channel Transmitter, ½ DIN, ¼ DIN
M700(X) Modular and Adaptive Transmitter
M700(X) Modular and Adaptive Transmitter
M400 4-wire Transmitter Multi-Parameter
M400 4-wire Transmitter Multi-Parameter
Transmitters
Analytical Transmitters
Multi-parameter transmitters for monitoring of key process and water analytical parameters such as pH, dissolved oxygen, conductivity and TOC.

Technical Specifications

Technical Data Conductivity Sensors InPro7000-VP & InPro7100-VP Series
Technical Data Conductivity Sensors InPro7000-VP & InPro7100-VP Series
New sensors with VP connector for very low to medium/high conductivity.
Get Your Quote
InPro 7000-VP Conductivity Sensor

Accessories

Get Your Quote
InPro 7000-VP Conductivity Sensor
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.