RX-10 with 3m touchscreen cable
Enhance Your Jacketed Lab Reactor.A Touchscreen-Based Control Unit to Automate and Monitor Jacketed Lab Reactors
One Simple, Standard Interface
The single and easy-to-use touchscreen interface provides a consistent and reliable control platform across all laboratory reactors.
100% Data Capture
Automatically collect process data from all laboratory reactors and sensors, together with data from in situ instruments (e.g. pH, EasySampler™).
Unattended Operation, 24/7
Use your reactor safely day and night, thanks to the pre-programming and safety capabilities of the RX-10.
|Supported Thermostats||Huber, Julabo and Lauda models with RS232 port|
|Supported Stirrer Motors||Ika, Heidolph, ChemGlass and J-KEM models with RS232 port|
|SmartConnect port||Pt100, -10 to 10V, 0 to 20mA|
|Dimensions (LxWxH)||70 mm x 152 mm x 215 mm|
|Power Requirements||100 – 240 VAC, 50/60Hz|
|Material Number(s)||30217050, 30208790|
Set-up – Connect – Get Started
RX-10 is designed for plug-and-play operation and facilitates the connection to third party accessories such as: cryostats, stirring equipment, sensors, dosing, or sampling units – quickly and without configuration.
With the SmartConnect Technology, sensors and probes used with the JLR are recognized automatically. Existing sensors such as temperature probes, mass-flow sensors, and pressure sensors can be retrofitted for use with SmartConnect.
State-of-the-Art Data Management
All process data is collected, processed, reported and securely stored to prevent lost information. Optional iC Data Center software guarantees that 100% of the captured data is stored in a safe place – automatically and with no additional burdens.