Low Installation Cost
M100 DR is an easy-to-commission 2-wire transmitter for installations where space is at a premium.
Predictive Maintenance
Access to ISM predictive diagnostic tools available over HART leads to reduced maintenance and increased process uptime.
Plug & Measure Operation
With iSense software, sensors can be calibrated via a PC or mobile device, then connected to the M100 without the need to recalibrate.
Material No.: 30127720
Parameter(s) | pH Conductivity Dissolved Oxygen ORP |
Sensor Type | ISM |
Current Output(s) Digital Output | 1 x 0/4-20mA |
Analog Inputs | 1 |
Inputs (2) | 1 |
Communication | HART |
Hazardous Area Approvals | No |
Approvals and Certificates | CE compliant |
Wired Mode | 2-Wire |
Power Supply | 14-30 VDC |
User Interface | None |
Relay Contact(s) | None |
PID Controller | None |
Channels | 1 |
Enclosure Material | PA-FR |
Protection Rating | IP20 |
USB Interface | No |
Size | DIN Rail |
Primary Media/Application | Chemical Processes Other Industrial Processes |
Model Family | M100 |
Small Footprint
The M100 DR is designed to be DIN rail mounted. It's suitable for 35 mm-wide DIN rail systems, and gives you the functionality that you require for control, without a local display.
Integration & Control via HART
The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.
Easy-to-Analyze Indicators
The M100 DR is outfitted with two LEDs to clearly indicate transmitter and sensor status as well as to communicate alarms and warnings visually to on-site maintenance staff.