Product Brochures
Crucibles serve as containers for samples during DSC and TGA measurements. They guarantee that the sensor is not contaminated during the measurement.
Crucible HP 270 uL, SST, pin
HP Ni Alloy 270 μL crucible with pin.The crucible is made of a high temperature resistant NiCr TiAl alloy. Thanks to its thread, the crucible can be sealed using a special sealing tool. After the measurement, it can be cleaned and reused. The crucible can only be used with a furnace expander.
Reusable HP Ni Alloy crucible
After the measurement, the crucible can be opened, cleaned and reused with the same seal disk. The maximum pressure is 10 MPa.
Chemically resistant crucible material
The material consists of a temperature resistant alloy made of Ni, Cr, Ti and Al. The crucible can be sealed thanks to its thread.
Furnace expander required
When sealed, the 270 μL crucible has a height of about 10 mm and the furnace expander must therefore be used, Art. No 51140735.
Material No.: 650072
Product Family:Crucibles000500080010
Specifications - Crucible HP 270 uL, SST, pin
| Material | Steel |
| Volume | 270 µL |
| Measuring Technique | DSC |
| Automation | No |
| Maximum Temperature | 750 °C |
| Maximum Pressure | 10 MPa |
| Number of Pieces | 1 |
| Included | with Lids |
| Pin | with |
| Beaker Volume | 270 µL |
| Lid | with |
Special sealing tool necessary
This is the tool for cylindrical crucibles made of Ni alloy. Fix the crucible in one of the holes and the cover in the other to seal them with the required torque.
Documentation