Withstands Challenging Applications
The sensor is designed for applications with a fast response time requirement. It is suitable for challenging ones such as filler line measurement.
High Operational Availability
The InPro 6970i offers outstanding measurement performance with a low detection limit of 0 ppb to 2000 ppb, minimum drift and a short response time.
Advanced Predictive Diagnostics
This DO sensor has Intelligent Sensor Management (ISM) technology, offering predictive diagnostics to reduce maintenance and simplify calibration.
Material No.: 52206393
Измеряемый параметр | Кислород |
Принцип измерения | Гашение флуоресценции |
Время отклика (2) | |
Основная среда / область применения | Продукты питания и напитки |
Цифровой (ISM) или аналоговый | Цифровой (ISM) |
Материал металлических смачиваемых частей | Нержавеющая сталь 316L |
Качество обработки поверхности смачиваемых частей | N5/Ra16 (Ra=0.4μm/16μin) |
Диаметр датчика | 12мм |
Материал уплотнительного кольца | EPDM |
Подключение к технологической линии | Pg 13.5 |
Длина | 120 mm |
Материал смачиваемой мембраны | |
Испольнение коннектора | прямой |
Семейство моделей | |
Автоклавируемый/стерилизуемый | Да |
Устойчивый к CIP | Да |
Механическое отображение измерения | 23 °F 250 °F |
Рабочее давление, фунт/кв. дюйм | |
Интеграция с цифровыми схемами | |
Кабельный разъем | |
Сертификаты соответствия гигиеническим нормам / биологической совместимости | FDA/USP Class 6 |
Сертификаты и разрешения на применение | |
Диапазон измерения | 0 - 2000 ppb насыщения |
Рабочий диапазон (концентрация) | 2 ppb 2 000 ppb |
Сопротивление измеряемому давлению | 0,2 bar 12 bar |
Стерилизуемый, автоклавируемый | |
Предел чувствительности | 2 ppb |
Easy and Fast Operation
With the fast OptoCap replacement and the Plug & Measure ability, the InPro6970i optical oxygen sensor can be calibrated away from the process, and then quickly swapped into the process environment without the need to recalibrate. No polarization is required.
High Process Safety
The materials of construction of the InPro6970i trace DO sensor are FDA compliant and the easy-to-clean high-polished surface (N5 grade) also satisfies increasing regulatory requirements.
Enhanced Process Control
The sensor's measurement performance helps to reduce out of spec production. ISM helps to make optical oxygen measurement simple and more reliable and significantly reduces the risk of sensor failure during production.
ISM Redefines Maintenance
The built-in digital ISM technology provides the user important information about the sensor wear. Maintenance planning becomes easy, as accurate diagnostics predict when sensor maintenance will be required.
Material No.: 52300399
Material No.: 30130631