Five key benefits of automatic metal detector testing in free fall applications. Manually testing metal detectors was once considered essential to help ensure systems were working to specification and delivering compliance and brand protection. However, there are many downsides to manual testing. Not only is it highly disruptive, it can also be inaccurate and put workers' safety at risk. Did you know that all the latest Mettler Toledo throat and gravity fall systems are now available with an approved automatic test system known as ATS? ATS is a non-invasive method of testing which uses a device that sits inside the metal detector's aperture and has been designed specifically to address some of the biggest pitfalls associated with manual testing vertical systems. Number one, compliance assured, confirmed centreline sensitivity. Ensuring accurate results can be particularly challenging when testing vertical metal detectors using snack food and confectionery applications and gravity-fed applications such as powder processing. We know test pieces are often dropped down the metal detector's aperture, delivering random and unreliable results. ATS is the only test method that we believe confirms centreline sensitivity, whilst using physical test pieces, as instructed in many industry standards. The centreline is the least sensitive part of a metal detector, and ATS uses an algorithm that correlates centreline sensitivity with edge -of-aperture sensitivity, eliminating the random nature of vertical metal detector testing. Number two, increased productivity, testing in under 40 seconds. Production downtime hurts the bottom line, and with schedules often tight, every stoppage represents lost production capacity and the potential for additional problems elsewhere. Metal detector testing using ATS requires one rather than two operators to carry out a complete end-to-end three metal test. This can be done in under 40 seconds compared to the average three to four minutes using more traditional manual methods of testing. Number three. Improve product quality. No cross-contamination threat. It takes time and consistency of products and processes to build a reputation for quality. However, this hard-won reputation can suffer irreparable damage because of a product recall, a costly scenario every manufacturer wants to avoid. ETS is non-invasive, ensuring test pieces don't come into contact with the food. This provides assurances that there is no risk of cross-contamination. This is particularly important when inspecting gravity-fed applications, such as powdered infant formula, where product quality and safety is paramount. Number four, enhanced operator safety, remote testing. Providing a safe working environment for employees is of vital importance. Metal detectors in vertical packing applications are often installed in inaccessible places due to their location in the production process. Conducting routine performance monitoring tests can require operators to work at height and regularly climb ladders. ATS virtually eliminates the need to work at height and removes the need for operators to reach across installed equipment to insert the test sample into the product flow. Number five, enables automatic record keeping, reduced risk of error. Testing metal detectors can often result in lots of extra paperwork from manual test records. Not only does this risk the loss of documentation and errors, but it can also be time consuming for someone to manually input the test results into a database. Fortunately, ATS can be used with Metler Toledo's data collection and management system, Prodex. When used with products, electronic records are automatically documented and stored for future reference. This reduces the risk of errors associated with paper records and the need for physical storage.
Investing in an approved metal detection automatic test system is essential if you want to make sure your equipment is working correctly, every time. Automatic test systems help you meet compliance needs while enhancing productivity and improving product quality.
Automatic Test System (ATS) from METTLER TOLEDO can help ease the burden of testing throat and gravity fall metal detection systems. It is designed to improve the accuracy of performance monitoring tests and reduce the time it takes to carry them out.
Download our Application Note: "5 Reasons to Invest in Automatic Test System" to discover how the Automatic Test System - along with Reduced Test Mode - can deliver significant quality and productivity benefits to your business.
Want a free survey to see how well your metal detector is performing? Contact your local sales representative to arrange a visit!






