We support and service your measurement equipment through its entire life-cycle, from installation to preventive maintenance and calibration to equipment repair.
Pure Water Conductivity Sensor
In-line Water Conductivity Cell for Pure Water Applications
A pure water conductivity sensor is an analytical instrument designed for monitoring pure water conductivity continuously for a range of applications. Digital water conductivity cells from METTLER TOLEDO have built-in measuring circuits and analog to digital signal conversion in the sensor head, which enables performance far exceeding that of conventional sensors. This helps you to achieve the highest accuracy in pure water conductivity monitoring applications.
Clear AllView Results ()
Filter ()
Add 1 or 2 more products to compare
Advance Measuring Circuit Enhances Accuracy
The UniCond family of in-line water conductivity sensors use an advanced, built-in measurement circuit, to provide exceptional accuracy and reduced risk of interference.
Ensure Compliance of Pharmaceutical Waters
UniCond pure water conductivity sensors meet USP <645> and global pharmacopeia requirements for conductivity and temperature measurement accuracy, compensation and calibration.
Maximize Yield in Semiconductor Manufacturing
METTLER TOLEDO pure water conductivity cells are trusted globally by semi fabs to help maintain their UPW systems and prevent water system problems that could negatively effect production yield.
Prevent Corrosion in Power Plants and Boilers
Designed to withstand high temperature applications, these pure water conductivity sensors ensure continuous measurement and monitoring for corrosion prevention in turbines and boilers.
Extensive Measuring Range
Available in 2-electrode and 4-electrode models, METTLER TOLEDO pure water conductivity sensors cover all ranges of measurement.
Water Conductivity Sensor for a Range of Processes
These water conductivity cells provide conductivity measurement in pure and ultrapure waters, pharmaceutical waters, make up water, power plant steam-cycle chemistry and semiconductor UPW.
Easy Start-Up and Commissioning
A digital water conductivity cell with Intelligent Sensor Management (ISM) stores calibration data and other sensor information in the sensor to enable plug and measure capability for fast startup.
Useful Related Links
Semiconductor Brochure
Our innovative multi-parameter instruments and sensors are specified to monitor UPW systems in the majority of semiconductor manufacturing facilities worldwide. Read more
Confidence, Convenience and Compliance in Water System Design
METTLER TOLEDO understands the water purification business and the challenges system fabricators face. Our focus on pure and ultrapure water measurements coupled with our commitment to meeting global water standards and regulations ensures that our products exceed the most stringent operation, calibration and validation requirements. Read more
Data Sheet: Thornton ISM Sensors for M800 and M300 ISM
METTLER TOLEDO Thornton M800 and M300 ISM process analytical instrumentation provides reliable, accurate measurements of conductivity/resistivity, pH/ORP, dissolved oxygen and dissolved ozone. On-board digital measurement and Intelligent Sensor Management (ISM) technology provide the utmost in convenience and control of sensor performance. Read more
UniCond Calibration
Periodic calibration of conductivity sensors is vital to measurement accuracy and is required by global pharmacopeias. The UniCond Calibrator uses NIST-traceable precision resistors to verify the performance of the temperature and conductivity circuitry of Thornton UniCond conductivity sensors. Read more
A Comprehensive Look at Conductivity Measurement
Conductivity has been the simplest, oldest, most common, most reliable and lowest cost measurement used for determining water purity. Nevertheless, this lowly measurement has provided the means for protecting and assuring efficient operation of billions of dollars worth of power and steam generation equipment throughout the world for over three-quarters of a century. Read more
Order
1300 659 761
Explore our Services - Tailored to Fit your Equipment
Remote Support
Fast intervention and full security with our remote support capabilities.
- On-Site Customer with Mobile Device
- Remote Technician on Computer
Uptime
Support & Repair
Support & Repair
Performance
Maintenance & Optimization
Maintenance & Optimization
Compliance
Calibration & Quality
Calibration & Quality
Expertise
Training & Consulting
Training & Consulting
FAQs
What is a pure water conductivity sensor?
A pure water conductivity sensor (or water conductivity cell) measures the ability of a solution to conduct an electrical current in pure water systems. It is the presence of ions in a solution that allows the solution to be conductive: the greater the concentration of ions, the greater the conductivity. These in-line pure water conductivity sensors are specially designed to measure accurately in low conductivity waters. In microelectronics and semiconductor production, the purity measurement of ultrapure water (UPW) is made as resistivity (the reciprocal of conductivity).
How many types of pure water conductivity sensors are there?
METTLER TOLEDO's flagship pure water conductivity sensor is the UniCond. This is a family of digital conductivity sensors especially designed for pure water monitoring.
Within the UniCond family there are two technology types of measurement technology that pure water conductivity sensors use:
- 2-electrode pure water conductivity sensors
- 4-electrode pure water conductivity sensors
How do you calibrate a pure water conductivity sensor?
A METTLER TOLEDO water conductivity sensor can be calibrated against a solution of known conductivity (much like calibrating a pH sensor against a solution of a known pH). Alternatively, an in-line water conductivity sensor that contains a range of very precise resistors that duplicate known pure water conductivity measurements can be used.
For applications in the pharmaceutical industry, special considerations should be made for compliance purposes when calibrating a pure water conductivity sensor. The UniCond Calibrator and Pharma Waters Verifier can help ensure that your calibration is pharmacopeia compliant.
What transmitters are METTLER TOLEDO pure water conductivity sensors compatible with?
Pure water conductivity sensors can integrate with any appropriate METTLER TOLEDO water transmitter that is suitable for conductivity. These conductivity transmitters include the M300 Water and M800 Water transmitters. The exact transmitter for your application should be selected in consultation with your local METTLER TOLEDO representative.